The SL-Deck is a prestressed concrete slab suitable for multilevel residential-, commercial-, and industrial buildings as well as for multilevel car parks.
The slab consists of a combination of lightweight concrete with a density of 800 kg/m3 and a self-compacting concrete (SCC) with a density of 2.400 kg/m3.
The light-aggregate concrete is casted with a special curved geometry leaving both lengthwise and transversal grooves, which form the structure of the self-compacting concrete. Thus the strong self-compacting concrete constitutes a ribbed slab surrounded by an insulating and stabilizing layer of light-weight concrete.
Prestressed reinforcement is placed in the lengthwise grooves of the slab and normal reinforcement is placed in all the transversal grooves, hereby a structure of cross-reinforcement is established. The amount and dimension of the reinforcement can be adjusted to fit the needs of a specific project.
A minimum of 200 mm massive SCC is casted in each end of the slab securing a high ability to handle shear forces in the areas where the slabs are supported. If necessary, additional reinforcement can be added to the ends of the slabs.
The SL-Deck is delivered in a standard version as a rectangular slab with a width of 2.4 meter (2396 mm). It is possible to deliver the SL-Deck with curved and skewed sides and ends, and by doing so adjust the geometry of the slab to the shape of the final building.
The SL-Deck can also be delivered in widths smaller than 2.4 meter.
The SL-Deck can be delivered with a height of 220 mm, 270 mm and 320 mm.
The surfaces (top and bottom) are both made with a smooth solid finish.
However, the undersurface of the SL-Deck can also be produced with an porous structure providing the slab with a sound dampening effect on the room below.
The SL-Deck is casted on steel moulds were the sides have been fitted with small blocks, creating recesses on the side of the slab. These recesses work as shear locks after they have been filled with grout during the on-site installation.
The SL-Deck is produced with the following tolerances:
L < 7 M 7 < L <14,4 L > 14,4 Larger when ends are not 90 degree angle on sides
± 12 mm ± 20 mm ± 30 mm Max 6 mm per 0,5 m
Full width (2396 mm) Variations (< 2396 mm)
± 5 mm ± 20 mm
T < 320 mm T = 320 mm
± 8 mm ± 12 mm
± 10 mm ± 15 mm
± 15 mm
The SL-Deck can be delivered with a large variety of openings as long as attention is paid to the placement of the steel reinforcement and the load carrying capacity of the individual slab and of the final structure.
The openings are made by placing opening molds on the casting lanes before the light-weight concrete is casted.