AireX panels

Light-Weight Concrete

AireX – Panels is a cost-effective wet-cast system for loadbearing – and non-loadbearing walls and partitions.

Paint ready hard surface: The wet cast AireX Panels treated with Abeo’s surface additive has a superior smooth, solid and level surface, reducing the need for plastering and sanding on the job site.
Fast installation: AireX Panels can be installed quickly using methods and tools similar to hollow-wall and AAC panels.
Water resistant: AireX Panels with Abeo’s Crystal Curing have a closed surface reducing water absorption from rain and onsite moisture.
Easy to reinforce: AireX Panels can be reinforced with soft PP fibers and steel, giving them superior tensile strength and making the fastening of doorframes, windows, electric switches and furniture easy and secure.
Low weight: Solid outside and airious inside, AireX panels combine concrete surfaces with low weight of 25-82kg./m2 depending on density.

Panel data

Dimensions (mm)	Possible range	Typical Partition wall	Heavy Partition (STC 50)	Light-Weight insulative panel W/mK 0,067
Width	200-1.200	600	600	600
Height	1000-4.000	2.400	2.400	2400
Thickness	50-300	100	200	100
Concrete density	250-1.000kg/m3	550kg/m3	825kg/m3	250kg/m3
Weight/panel	2.5-1440kg	79kg	238kg	36kg

AireX Slabs and panels are designed to be produced in U-shaped steel frames loaded into compressing battery forms of 25 frames.

Start

Batching and mixing

1. Hour

Casting

5. Hour

1st curing in battery – Frames removed

16. Hour

2nd curing – demoulding from frames

17. Hour

Preparation of frames complete

AireX Slabs for roofs and multilevel construction can be produced simply by adding steel reinforcement to AireX Panels.

Slabs can be produced using the same equipment as AireX Panels and are suitable for shorter spans of 2-6 meters.