New solution: An end to visible ceiling joints

With the SL-deck’s new “joint-fee” solution, it is now possible to create smooth and aesthetical nice-looking ceilings without the use of a dropped ceiling system.

Following a 2-year development programme, Abeo has introduced a “joint-free” solution for the SL-deck making it possible to conceal the traditional precast ceiling joints.

With the new solution, SL-decks are delivered with a 250mm recess in the underside ready to be spackled after the SL-decks have been lifted in place. The solution ensures that the final ceiling surface will appear even and homogenous without visible joints and thus makes it possible to improve the aesthetic quality in a very cost-efficient way – without the use of a dropped ceiling system.

  • Traditional precast ceiling
  • SL-deck concealed joints solution


Result in final apartment unit


Prestressed precast slabs were introduced in the 1950’s and has since evolved into a dominant slab system in a number of countries, especially in Scandinavia and Benelux. Precast concrete has had an important role in the industrialization of the construction industry by moving a large of the construction process to factories and improving the construction flow. However, the introduction of precast concrete units has also come at the expense of certain aesthetical considerations, including the emergence of visible ceiling joints.

The reason for the visible ceiling joints is due to camber differences. Camber is a well-known phenomenon within precast concrete buildings and a natural consequence of the use of prestressed reinforcement. It is not possible to avoid camber differences between slabs all-together, why all prestressed slab systems have always been produced with chamfering in the sides. Such chamfering helps make sure that camber differences will not be noticed by the human eye.

In Scandinavia and Benelux, visible ceiling joints are generally accepted today, primarily due to the economic benefits of using precast concrete units. However, in Central- and Southern Europe, visible ceiling joints are to a much wider extent perceived as having an industrial and “ghetto-like” look and is one of the reasons prestressed slabs have found it difficult to penetrate the market for residential construction in these markets. Rather, cast-in place solutions or non-prestressed filigree slabs (half slabs) with a cast-in place topping are used with the economical and timely benefits of precast construction vanishing.

In Scandinavia and Benelux today, smooth and joint-free ceiling are primarily reserved for “luxury” projects. In such projects, this look is achieved using dropped ceilings systems (typically gypsum boards) underneath the slabs. Dropped ceiling are, however, both expensive to install while also increasing the height of the building.

With the SL-deck’s joint-free solution, it is now possible to achieve to high aesthetical quality from cast-in place construction with the speed and cost-efficiency of precast construction.

Se flere nyheder

SL-deck pulls its weight for 9 High School projects in South Carolina

Last month, Tindall developed a total precast weight room with amenities area for Travelers Rest High School, the first of nine projects to be erected in South Carolina.

SL-decks for 350 apartments

Industri Beton has won the full precast contract for 350 apartments in Aarhus based on an SL-deck solution significantly cutting the project's costs and timeline.

Tindall Corporation introduces the SL-deck to the U.S. Market

On 1st of June 2020, Tindall Corporation officially launched the SL-deck into the American market. This has been done under the American trademark 'T-SLAB'.

New solution: An end to visible ceiling joints

With the SL-deck's new "joint-fee" solution, it is now possible to create smooth and aesthetical nice-looking ceilings without the use of a dropped ceiling system.

Abeo and Tindall Corporation sign license agreement

Abeo and the American precast concrete producer, Tindall Corporation, have entered into a license agreement concerning the Southeastern part of the USA.

Big contract wins in Denmark

An order for 3 remarkable apartment towers containing 400 apartments concludes a period of several large contract wins for danish SL-deck producer, perstrup. the order book...

Lujabetoni invests in new SL-deck factory

On 8 february 2018, Lujabetoni concluded the acquisition of a large factory building close to helsinki. With the new production facilities, Lujabetoni significantly increases the SL-deck production capacity...

High demand for SL-decks in Finland

Since Lujabetoni launched the SL-deck to the Finnish market in October, the product has attracted vast interest from Finnish contractors with several projects underway. The...

Lujabetoni and Abeo signs license agreement

Abeo and the Finnish precast producer, Lujabetoni, has made a license agreement for bringing the SL-deck to the Finnish market from January 2018. The SL-deck will be marketed under...